Broach Fine TCT Cutters

Broach cutter, tct broach cutter, tct annular cutter, Broach cutter manufacturer, tct broach cutter manufacturer, tct annular cutter manufacturer

BFC TCT cutters are made with special-purpose carbite tips for reduced damage of tips and better endurance. These are suitable for cutting holes on various materials with high speed, Multi-cut geometry results in increased chip removal and less resistance.

Broach cutter, tct broach cutter, tct annular cutter

Broach Fine HSS Cutters

BFC Annular Cutters are made of special Blended HSS Alloy Steel which results in Edge Sharpness that tasts longer, drilling more holes than standard HSS cutters.

Punch &Die

Punch tooling (punch and die) is often made of hardened steel or tungsten carbide. A die is located on the opposite side of the workpiece and supports the material around the perimeter of the hole and helps to localize the shearing forces for a cleaner edge. There is a small amount of clearance between the punch and the die to prevent the punch from sticking in the die and so less force is needed to make the hole. The amount of clearance needed depends on the thickness, with thicker materials requiring more clearance, but the clearance is always less than the thickness of the workpiece. The clearance is also dependent on the hardness of the workpiece.

Punch and Dies, Dies and Punches, Punching Dies, Punching Dies manufacturer

Rail Broach Cutter

Cutter Capacity: Ф12-Ф35
Cutter Deepth: 50mm
Spindle holder: 19mm
No Load Speed: 595RPM
Electric Date: 230V/50Hz/1800W
Stroke: 190mm

Step Drill

1. Made of high quality high speed steel.


Step Drill, titanium step drill, step drill bit, Step Drill manufacturer